Scotland
Contact
VWS Westgarth Office Contact


Orbital House
3 Redwood Crescent
East Kilbride
G74 5PR
UK


Tel:
+44 (0)1355 588 000
Fax: +44 (0)1355 588 001

Web: www.vwswestgarth.com
Email: graeme.orr@veolia.com

Veolia Water Oil & Gas Angola Contact:

Viana Park
Pavilhão nº1 Quarteirão 9
Estrada do Calumbo
Pólo Industrial de Viana
Luanda
República de Angola

Tel: +244 940 120 949
Tel: +244 949 229 399

Web: www.vwsoilandgasangola.com
Email: Enquiries.VWOGA@veoliawater.com

Compact Flotation Unit

Traditional produced water treatment is usually comprised of hydrocyclones followed by degassing or flotation processes. Increasingly stringent environmental discharge requirements plus the constant pressure to reduce equipment footprint have led to the development of the Compact Flotation Unit (CFU). VWS has taken this process forward to the next level with the Cophase™ CFU.

Design Philosophy

  • Remove the need for a pressurised gas supply
  • Improve oil removal efficiency
  • Minimise footprint and weight
  • Reduce maintenance
  • Extend operating life
  • Eliminate power requirements
  • On and offshore compatibility

How it works

The Cophase™ CFU operates by combining the well established principles of gas flotation, oil droplet coalescence and centrifugal separation into a single process step. To find out more about how the CFU works, please take a look at our Cophase™ CFU brochure.

The Cophase™ CFU LoHead™ Eductor

The Cophase™ CFU LoHead™ eductor design is unique in that 100% of the inlet flow is fed through the gas eductors, thus maximising bubble generation and contact between the oil droplets and gas bubbles. By enhancing the opportunity for contact between the oil droplets and the gas bubbles, greater oil removal efficiency for a given vessel volume is achieved.

The LoHead™ eductor design also generates a vortex within the separation volume. This vortex applies centripetal force upon the heavier water and solids, forcing them to the periphery of the vessel and therefore concentrating the oil and gas bubbles in the centre and so aiding agglomeration and coalescence.

An important feature of the Cophase™ CFU is that this vortex, combined with the internal geometry of the vessel has been designed using Computational Flow Dynamics (CFD) to suppress backmixing in the vessel. This means that the water passes through the separation volume in what is termed "rotating plug flow", which leads to a higher oil removal efficiency than is achieved in the older designs of flotation units currently available.

Cophase™ CFU Benefits

  • Highly tolerant of typical FPSO motion
  • Self regulating oil skimmer eliminates gas and reduces water in the reject stream
  • Skimmed flow minimised to <1% of total flow
  • One minute retention time reduces vessel size and weight
  • No motor or pump consuming power
  • Turndown performance is consistent
  • 100% of the inlet flow passes through the LoHead™ eductors ensuring excellent gas/liquid contact and superior separation performance
  • No rotating parts to maintain
  • Designed for high flow rate
  • No need for pressurised water or gas; in most cases no gas consumption at all

By combining a Cophase™ CFU with our STREAMLINER™ and SandLiner range of hydrocyclones, common problems associated with interfacing plant from different suppliers are eliminated.