Scotland
Contact
VWS Westgarth Office Contact


Orbital House
3 Redwood Crescent
East Kilbride
G74 5PR
UK


Tel:
+44 (0)1355 588 000
Fax: +44 (0)1355 588 001

Web: www.vwswestgarth.com
Email: carol.easton@veolia.com

Veolia Water Oil & Gas Angola Contact:

Centro Logistico de Talatona
Via C3A Sector de Talatona
Gleba GU - No. 4278 
Andar - RC - No./Letra
Belas - Luanda
República de Angola

Tel: +244 222 711 799

Web: www.vwsoilandgasangola.com
Email: Enquiries.VWOGA@veoliawater.com

FPSO Saxi-Batuque (150,000 BWPD)

Process: Sulphate Removal

Client: Single Buoy Moorings Inc.

Country: Monaco, Switzerland, Angola

Contract Description: Supply of membrane plant for sulphate removal

Contract Date: May 2006

Contract Completion Date: July 2007

Capacity: 150,000 BPD (23,850m3/day)

Sea Water Conversion: 75%

Sea Water Feed Quality: 36,000 mg/l (tds)

Fresh Water Output Quality: £ 40 mg/l sulphate
 

Project Description:

The Project is for the design and supply of a seawater treatment plant sized for 150,000 BPD (23,850 m3/day) of low sulphate water for FPSO Saxi-Batuque, which will operate in the Block 15 Field, offshore Angola.

The Project scope consists of a multi-skid arrangement comprising: Guard Cartridge Filtration, HP Feed Pumps, Sulphate Removal Membrane System, Chemical Cleaning System, Chemical Dosing Systems, Control Valves and Instrumentation.A Service Water System is also provided, sized for 12,075 BPD.

Process Description:

Fine filtration is achieved by a set of cartridge filters to provide fine filtration down to 5µm prior to membrane trains. The set of cartridge filters supplies feed water for three (3) trains.

The conditioned water, boosted to the required feed pressure, enters the Sulphate removal trains. Each membrane train is fitted with pressure vessels containing SR90-440i nanofiltration elements.A recovery of 75% is achieved by a 2:1 brine staged configuration. Brine reject from the process is discharged overboard, while the low Sulphate permeate is routed to a vacuum deaerator (provided by others). A dedicated clean in place (CIP) package, consisting of cleaning tank, pump, heater and cartridge filter vessel is provided for membrane cleaning purposes.A SWRO package plant is provided to supply wash water for the main process plant.Chemical Dosing systems for the SRP system and the Client supplied equipment (pre-treatment and deaerator) are also provided.